Best EGR Delete kit for 6.7 Cummins: Top Picks and Reviews

Learn about EGR Delete kit for 6.7 Cummins, common issues, and how a EGR Delete kit can prevent failures.

1. Understanding the Importance of EGR Delete

1.1 What is a EGR (Exhaust gas recirculation)

Exhaust gas recirculation (EGR) is the move to cut down NOx levels from your engine. It works by mixing some exhaust gases back into the engine's cylinder, swapping out a bit of the air with CO2. This trick lowers the combustion temperature because there's less oxygen in the mix, which means less NOx is formed.

You can cool those exhaust gases externally and pipe them into the inlet manifold, or handle it internally through the camshaft.

Read on to learn about the role of EGR in 6.7 Cummins.

1.2 The Role of EGR in 6.7 Cummins Engines

In the 6.7 Cummins engines, the EGR system is all about cutting down on those nasty nitrogen oxide (NOx) emissions. It does this by taking some of the exhaust gases and sending them back into the intake manifold. This swap cools down the combustion temps because it reduces the oxygen level, which means less NOx gets formed.

The exhaust gases usually go through an EGR cooler before heading back into the engine, dropping the intake air temp even more and making the whole process more effective. The EGR system keeps the engine in check, balancing emissions with performance. But, you've gotta keep it clean—over time, the EGR valve and cooler can get clogged with soot and gunk, messing with your engine's performance and fuel efficiency.

2. Common Issues Caused by EGR

EGR is basically a slow killer for any engine. That abrasive exhaust is wrecking your rings and internal components. Without EGR, your oil stays way cleaner, the engine runs cooler, you get better MPG, and you spend less time in the shop dealing with busted EGR parts.

With EGR, you're looking at an overhaul every million miles. And on new engines, you can’t just delete the EGR or you'll fry the pistons and valves. Manufacturers are cranking up the compression and adding more fuel to run hotter, then using EGR gases to cool things down and control the burn. It’s a tricky balance, but that’s how they manage emissions while keeping the engine from cooking itself.

3. The Financial Impact of EGR

3.1 Repair Costs Associated with EGR Failures

Repairing an EGR valve? You're looking at dropping between $376 and $462 on average. Labor's gonna set you back about $90 to $113, and the parts run from $287 to $349. Keep in mind, this doesn’t cover taxes, fees, or any extra repairs that might pop up, and prices can vary depending on where you’re at.

3.2 Long-term Consequences of Neglecting EGR Maintenance

If your EGR valve is acting up, you'll definitely feel it in your ride. Expect a rough idle, hesitation, or even stalling when you fire up your engine. Acceleration might be sluggish, and you could notice a serious lack of power, especially when tackling hills. Plus, you'll probably see your fuel consumption go up.

4. Introducing the Dynovox EGR Delete Kit for 6.7 Cummins

4.1 Key Features of the Dynovox EGR Delete Kit

Enhanced Engine Performance: The Dynovox EGR Delete Kit boosts your engine's performance by eliminating exhaust gas recirculation, resulting in improved power and throttle response.

Improved Fuel Efficiency: By removing the EGR system, your engine runs more efficiently, leading to better fuel economy and reduced operating costs.

Lowered Engine Temperatures: The EGR Delete Kit helps lower engine temperatures by removing the recirculated exhaust gases, reducing the risk of overheating and extending engine life.

Reduced Maintenance Costs: With the EGR system gone, there's less chance of clogging and related issues, meaning fewer trips to the mechanic and lower maintenance costs overall.

Easy Installation: The Dynovox EGR Delete Kit comes with comprehensive instructions and all

necessary hardware, making it straightforward to install, even for DIY enthusiasts.

Continue reading to learn about the benefits of Dynovox EGR Delete Kit

4.2 Benefits of deleting the EGR with Dynovox EGR Delete Kit

Boosted Engine Performance: Removing the EGR system with the Dynovox kit enhances your engine's power and responsiveness, delivering a noticeable improvement in overall performance.

Better Fuel Efficiency: Without the EGR, your engine operates more efficiently, resulting in improved fuel economy and savings on fuel costs.

Lower Engine Temperatures: The delete kit helps reduce engine temperatures by eliminating the recirculated exhaust gases, minimizing the risk of overheating and prolonging engine life.

Reduced Maintenance Costs: Say goodbye to EGR-related issues and frequent repairs. With the EGR deleted, you'll spend less time and money at the mechanic.

Cleaner Engine Oil: Without exhaust gases being reintroduced into the engine, your oil stays cleaner for longer, improving engine lubrication and extending the intervals between oil changes.

5. Compatibility and Fitment of the Dynovox EGR Delete Kit for 6.7 Cummins

Don't wait until it's too late—Delete today with Dynovox EGR Delete Kit and drive with confidence.

Older Post

Newer Post