What is the best delete kit for 6.7 powerstroke?

What is the delete kit?

A delete kit refers to a modification package used in diesel vehicles to remove or disable certain emissions control components, primarily the Diesel Particulate Filter (DPF), Exhaust Gas Recirculation (EGR) system, and Selective Catalytic Reduction (SCR) system. The primary purpose of a delete kit is to enhance engine performance by improving exhaust flow, which can lead to increased horsepower and torque. 

Additionally, removing these components may result in improved fuel efficiency and decreased maintenance costs, as parts like the DPF and EGR valves are often prone to clogging and failure. 

Experience with the 6.7L PowerStroke Deleted Truck

In collaboration with DynoVox, an esteemed automotive influencer recently carried out an in-depth performance evaluation of a 6.7L PowerStroke diesel truck, employing a dynamometer to gauge its capabilities. This initiative was meticulously designed to measure the truck's power output before and after the strategic deletion of several emissions components. By keeping the engine in its original stock condition at the outset, the evaluation aimed to establish a thorough and objective baseline performance metric, ensuring that the subsequent impact of the DynoVox modifications could be fully comprehended and appreciated.

The topic of truck "deletion," which involves the removal of certain emissions control systems, has been a subject of considerable interest and debate among automotive enthusiasts and professionals alike. This process typically replaces the Diesel Particulate Filter (DPF) and Exhaust Gas Recirculation (EGR) system with performance-enhancing alternatives, ultimately optimizing engine efficiency and power output. While some owners express concerns regarding potential implications for vehicle warranties, others pursue these modifications enthusiastically, driven by the promise of substantial gains in performance and fuel economy.

Initial Dyno Runs

During the initial phase of testing, the influencer achieved a peak horsepower reading of 340 and a maximum torque output of 602 ft-lbs. The tests were conducted in fourth gear, which closely mimics a 1:1 gear ratio, thus ensuring precise torque measurement. The highest reading, showcasing an impressive torque output of 600 ft-lbs, was achieved during this phase of the testing regime. Further trials in fifth gear consistently yielded a horsepower of 340, although the torque value declined to 524 ft-lbs, a likely consequence of the overdrive effect experienced in this gear.

To provide a comprehensive view of the truck's baseline performance, the influencer meticulously documented these results, setting the stage for the subsequent modifications and offering a clear point of reference for comparative evaluation.

Installation of the 6.7L Powerstroke DynoVox Kit

Upon completion of the initial dyno runs, the influencer proceeded to install a 5-inch exhaust system designed to facilitate the removal of the EGR system. This robust installation was accompanied by Easy Link tuning, provided by DynoVox, further enhancing the truck's capabilities. The deletion hardware kit, priced competitively starting at around $1,600, presented a broad spectrum of tuning options compared to more basic kits on the market. Following the installation process, the truck was equipped with a sophisticated switch, allowing for the selection of five distinct power levels. The influencer initially selected a "hiss" tune, which produced a remarkably distinctive auditory experience, resonating strongly with the influencer's performance expectations.

Testing and Fuel Economy

Before embarking on a comprehensive test drive, the influencer undertook a critical transmission reprogramming process aimed at optimizing performance. This procedure involved conducting a "relearn" phase to ensure the transmission adapted smoothly to the newly implemented power settings. Throughout the test drive, fuel economy metrics were systematically tracked and recorded. At a speed of 100 km/h, fuel consumption registered at 13.2 L/100 km, an admirable figure considering the lift and tire dimensions associated with the truck. As speed increased to 110 km/h, consumption adjusted to 15.6 L/100 km, and at 120 km/h, it slightly rose to 16 L/100 km. These figures indicated satisfactory fuel efficiency outcomes given the modifications undertaken.

The influencer's attention to detail in monitoring these metrics highlighted not only the enhancements in performance but also underscored the balance achieved between increased power and fuel efficiency. Such findings undoubtedly contributed to the comprehensive understanding of how the DynoVox modifications impacted the vehicle's overall functionality.

Performance Gains

With the successful installation of the DynoVox modifications, the truck's performance experienced a marked improvement. Originally, the stock configuration of the vehicle delivered 336 horsepower coupled with 700 ft-lbs of torque. Following the tuning process facilitated by DynoVox, the performance metrics dramatically increased, reaching a peak power of 451 horsepower in fourth gear, complemented by a torque measurement of 996 ft-lbs. Subsequent tests conducted in fifth gear revealed a maximum horsepower of 461, highlighting a substantial boost in power achieved through the modifications while maintaining robust torque levels.

This enhancement not only testified to the efficacy of the DynoVox kit but also demonstrated the kit’s ability to significantly amplify the truck's performance, allowing it to operate at levels far exceeding its original stock capabilities. The results were a testament to the strategic selection and implementation of performance optimizing technologies employed throughout the process. 

Final Thoughts

In conclusion, the influencer's experience with the DynoVox deletion kit was overwhelmingly positive, underscoring the kit's potent capability to enhance truck performance without encountering significant issues post-installation. Although questions regarding the legality and potential warranty implications of such modifications persist, the benefits in terms of enhanced performance and operational efficiency are unequivocal.

For those contemplating similar upgrades, it is strongly advised to undertake thorough research and deliberate consideration of all available options. DynoVox earnestly encourages individuals interested in augmenting their vehicle performance to explore the product offerings linked in the description. Should any questions arise or if there is a desire to follow DynoVox’s journey, we warmly invite interaction via our social media channels.

Thank you for your engagement and interest in DynoVox. We eagerly anticipate sharing additional insights and updates through our channels in the near future, and we wish you prosperous and secure driving as you continue on your automotive journey!