□
Fast, Free Shipping Within U.S.A.
  • All
Vehicle(s) Fit Information
View All
Year
Make
Model
Engine

PACKAGE INCLUDES

  • Pipe x 2
  • Flange Clamp x 1
  • 1 Pack Screws & Nuts

2011-2023 Ford 6.7L Powerstroke Diesel 4" DPF & Cat Delete Pipe

The DynoVox 4" DPF & Cat Delete Pipe for 2011-2023 Ford 6.7L Powerstroke Diesel is designed to replace the Diesel Particulate Filter (DPF) and Catalytic Converter (Cat), improving engine performance by reducing exhaust backpressure. This high-quality, direct-fit pipe enhances exhaust flow, increases horsepower, and optimizes fuel efficiency. It is perfect for those looking to unlock the full potential of their Ford 6.7L Powerstroke engine, offering both performance gains and long-lasting durability.

Vehicle Compatibility:

The DynoVox 4" DPF & Cat Delete Pipe is designed specifically for 2011-2023 Ford 6.7L Powerstroke Diesel trucks. It is compatible with a wide range of Ford Super Duty models, including the F-250, F-350, F-450, and F-550, equipped with the 6.7L Powerstroke diesel engine.

Please note that this product is incompatible with trucks equipped with air-ride suspension or the Cab & Chassis commercial-style configuration. 

Product Features and Benefits

The DynoVox 4-inch Exhaust is made of high quality T-409 stainless steel with a thickness of 2 mm. It is rigorously tested for corrosion resistance and durability to ensure long term stable operation. The aluminized silver finish is not only aesthetically pleasing, but also provides excellent performance.

With this exhaust installed, you can easily remove the diesel particulate filter (DPF) and exhaust gas recirculation (EGR) system, effectively increasing horsepower and significantly improving fuel economy. It restores power to your pickup while reducing fuel costs.

Installation:

Installation typically takes about 1 hour using basic hand tools and can be done on the floor of your driveway or garage. Using a car lift may be faster. For vehicles with shorter wheelbase bed/cab configurations, some cutting may be required. This includes clamps, hangers, and hardware, but you may need to reuse some of the stock parts.

Tuner is required:

Deleting the DPF, CAT, SCR, and/or DOC requires eliminating emissions-related sensors. To avoid triggering a Check Engine Light or Diagnostic Trouble Code, a tuner with DPF Delete capability must be used.

 

Brand DynoVox SKU QMP-HW00149
Body Material High Quality Stainless Steel Color Silver
Weight 12.5kg Comply with Factory Testing Standards Yes
Type DPF Delete Pipe Warranty 5 Year
Package Size Length: 121in Width: 32in Height: 18.5in   
Surface Mirror Polish
Item Condition New

NOTE

While anyone with basic mechanical knowledge can install a DPF delete kit, it is recommended that it be installed by a professional mechanic to ensure proper installation and avoid any potential problems.

DISCLAIMER

1. By installing this product onto your vehicle, you assume all risk and liability associated with its use. 2. It is your responsibility to make sure your Vehicle complies with all federal, state, and local emissions laws. Federal and many state and local laws prohibit the removal, modification, or rendering inoperative of any part of the design affecting emissions or safety on motor vehicles used on a public street or highway Violation may result in a fine of up to $ 32,500 per vehicle ( or possibly higher depending on changes in the law ). All civil penalties and fines for removing your vehicle emissions equipment are the sole responsibility of the end user. 3. Due to its high-performance nature, this product may void the vehicle manufacturer's warranty. 4. DynoVox is not responsible for the misuse of its products By installing this product, you release DynoVox of any liability associated with its use. 5. Depending on where you live, restrictions may apply. Check all applicable laws before installing or using. 6. The purchaser and end-user release, indemnities, discharges, and holds harmless DynoVox from any claims, damages, causes of action, injuries, or expenses resulting from or relating to the use or installation of this product that is in violation of the terms and conditions on this page, the product disclaimer, and/or the product installation instructions. DynoVox will not be liable for any direct, indirect, consequential, exemplary, punitive, statutory, or incidental damages or fines caused by the use.

Frequently asked questions
What is the 4" DPF & Cat Delete Pipe for the 2011-2023 Ford 6.7L Powerstroke Diesel?
The DynoVox 4" DPF & Cat Delete Pipe is an aftermarket performance upgrade for the 2011-2023 Ford 6.7L Powerstroke Diesel. It replaces the factory Diesel Particulate Filter (DPF) and Catalytic Converter (Cat) to improve exhaust flow, increase horsepower, and reduce engine backpressure, resulting in enhanced engine performance and fuel efficiency.
How does the 4" DPF & Cat Delete Pipe improve engine performance?
By eliminating the restrictive DPF and Cat, the DynoVox 4" DPF & Cat Delete Pipe increases horsepower and torque. The enhanced exhaust flow reduces backpressure, allowing the engine to run more efficiently and with better throttle response. This leads to improved overall engine performance and a more responsive driving experience.
How much horsepower can I gain with the 4" DPF & Cat Delete Pipe on my 6.7L Powerstroke?
Installing the DynoVox 4" DPF & Cat Delete Pipe on your 6.7L Powerstroke can increase horsepower by up to 30-50 horsepower, depending on other modifications and vehicle tuning. The exact gains will vary, but the pipe significantly enhances engine efficiency.
Does the 4" DPF & Cat Delete Pipe improve fuel economy?
Yes, by reducing backpressure and improving exhaust flow, the DynoVox 4" DPF & Cat Delete Pipe can result in improved fuel efficiency. Many users report better miles per gallon (MPG) after installation, particularly when paired with proper tuning for optimal performance.
Translation missing: en.general.search.loading